Ashly ne4250.70 4-Ch Amplifier - 250W RMS per Channel with Dante Interface Card

Description

Ashly ne4250.70 4-Ch Amplifier - 250W RMS per Channel with Dante Interface Card. Condition is "Used".
ne4250.70 with Dante Interface Card
The four-channel power amplifier will deliver a minimum power of 250 Watts RMS per channel into 70V loads with all channels operating.
When switched into bridged-mono mode, channels 1+2 or 3+4 of the amplifier delivers at least 500 Watts RMS into a 140V load.
The power amplifier
have remote standby for power up, DC remote level control and contact closure preset recall. Comes with Ethernet control and monitoring of power functions, level, mute, polarity, temperature, current, and amplifier fault conditions. Frequency response shall be 20Hz to 20kHz ±1.0dB. Signal-to-Noise shall be greater than 105dB unweighted and SMPTE intermodulation distortion shall be less than 0.5% into an 8 Ohm load, 10dB below rated output.
The front panel provides the status of power, standby, protect, power switch disable, signal level, bridge, over-temperature, over-current, and Ethernet communication. The power amplifier has a factory installed Dante® interface card. The amplifier mounts in a standard 19 inch rack using two spaces (3.5.
high) and weigh 23 pounds (10.4kg) or less.
The power amplifier is an Ashly model
ne4250.70